Matrix SETU ATA is a SIP based Analog Terminal Adaptor (ATA), it
interfaces legacy telephone devices with IP-based networks. It is
specially designed for SOHO users to offer them the advantages of low-
tariff Internet Telephony for long distance calls, international calls and
peer-to-peer calls. It can be used with any existing PBX providing users
access to VoIP trunks. It can also be used in a stand-alone mode.
Matrix SETU ATA converts the voice traffic into data packets for
transmission over the Internet. When a telephone number is dialed by a
user, Matrix SETU ATA converts it into an IP call using the SIP protocol
and initiates a call to the dialed number in any part of the globe. Using an
appropriate VoIP service provider, long distance or inter-office call
charges can be reduced significantly or eliminated through peer-to-peer
calling on the IP network.
Making an outgoing call is as easy as from a normal telephone. Call
progress tones like Dial Tone, Ring Back Tone and Busy Tone are fed to
the caller as per the called number status. The FXS ports can make
outgoing calls on a common or different SIP accounts. In addition,
number based SIP account selection is provided to select the most
economical SIP account for a given outgoing number.
An incoming call from a SIP account can be routed to any one or both
FXS ports. All different CLIP protocols are supported so that the user
can identify the caller before answering the call.
Once a call is established, features like Call Hold, Call Toggle, Call
Transfer, Call Wait and Conference are supported to manage two calls
from the same FXS port. Call forward in different conditions and Do Not
Disturb is also provided.
The FXO port allows users to originate a call and terminate it at VoIP
network. The routing logic used between FXO and VoIP helps the user to
dial a destination PSTN number directly over VoIP network. Using FXO-
VoIP routing logic two or more PBX can be networked to offer seamless
connectivity between the PBXs
Matrix SETU ATA provides two Ethernet ports - one for WAN and the
other for LAN. The user can connect his PC on the LAN port and browse
the internet or check his emails while talking on VoIP calls.
Matrix SETU ATA can also be used with any PBX without changing its
existing infrastructure. PBX users can make voice calls on IP to avail of
the low-tariff of VoIP calls. The users can continue to make and receive
calls without worrying on which network their calls are routed. Matrix
SETU ATA is easy to install and operate. It can be configured using its
built-in web pages served by the internal HTTP server.
SETU ATA2S
2-FXS Ports, 1-WAN Port and
2-SIP Accounts
SETU ATA1S
1-FXS Port, 1-WAN Port,
1-LAN Port and 2-SIP Accounts
SETU ATA211
1-FXO Port, 1-FXS Port, 1-WAN Port,
1-LAN Port and 3-SIP Accounts
VoIP ATA With Unique Integration of Technology
Features and Reliability
(10 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales