Matrix E7x Especificaciones descargar pdf (Pagina 49)

9.6 DRIVE BELT REPLACEMENT

1) Turn off the power and disconnect the cord from the machine.

2) Remove the right side front disk from the machine as outlined in Section 8.1.

3) Loosen the belt tension screw on the left side of the tension pulley and rotate the pulley counter clockwise until there is enough slack in the belt

to remove it (Figures A & B).

4) Walk the new drive belt into position on the drive assembly.

5) Once the drive belt is in place, reapply tension by rotating the tension pulley clockwise until there is 170 ft / lbs of tension on the belt. Tighten

the belt tension screw to hold the tension pulley in place (Figure C).

6) Reinstall the front shroud and disk.

7) Test the Elliptical Trainer for function as outlined in Section 8.21.

FIGURE A FIGURE B

FIGURE C

CHAPTER 9: PART REPLACEMENT GUIDE

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 89 90

Comentarios a estos manuales

Sin comentarios

Matrix E7x Especificaciones Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Bicicletas de spin Matrix E7x