Matrix SETU ATA211 SIP-FXS-FXO Especificaciones descargar pdf (Pagina 71)

Matrix SETU ATA211 System Manual 65

Advanced

1. If the SETU ATA211 is connected in VLAN network, configure the VLAN/CoS.

This parameter enables the SETU ATA211 to add VLAN header to the packets generated by it. The VLAN

header consists of the VLAN ID (12-bit) and Class of Service (CoS, 3-bit) for prioritization of traffic

• Select the VLAN/CoS check box to enable VLAN ID tagging on all packets generated by the system.

Default: Disabled.

• Enter the VLAN ID that you have assigned to the VLAN in which the SETU ATA211 is connected. The

valid range for this is 0-4094. Default: 0001.

• For SIP CoS, define the CoS (priority) bits which will be added in all SIP packets. The range of CoS bits

is from 0 to 7. Default: 3

• For RTP CoS, define the CoS (priority) bits which will be added in all RTP packets. The range of CoS

bits is from 0 to 7. Default: 6.

2. SETU ATA211 will send all SIP messages using SIP QoS setting, enter the SIP DiffServe/ ToS as per

your requirement.Valid range is from 00-63, Default: 26

6. The IEEE 802.1P standard allows Layer2 switches to prioritize the traffic, thus providing Quality of Service (QoS), i.e. better handling

of data that pass over a network, thereby resulting in greater reliability and quality. Quality of Service (QoS) on Layer2 is referred to as

Class of Service (CoS) which is defined by IEEE 802.1P.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 175 176

Sin comentarios

Matrix SETU ATA211 SIP-FXS-FXO Especificaciones Pagina 71